Fold-A-Vent Ridge Vent Ventilation System

Fold-A-Vent Ridge Vent is a continuous 20' piece that is folded into five 4' segments!

Fast, easy one-man installation!
Lays down straight and smooth (unlike corrugated rolled vents)!
In use nationwide, on all types of roofs, for over 30 years!
Performance for the life of your roof!

Easy-To-Install Ridge & Soffit Ventilation System!

Fold-A-Vent is easier to install because it is folded, not rolled. Each unit consists of five 4' sections. Once unfolded, it extends to a flat, smooth, continuous 20-foot vent. The bundle stays put on the ridge during installation. Fold-A-Vent can be secured with a power nailer. Won't crush, won't plug and won't roll away!
The corrugated plastic cross-section lets air flow freely through the vent. Fold-A-Vent removes hot and moist air for the life of the roof!
With Fold-A-Vent, there's no need for unsightly roof vents, fans or turbine ventilators. It's very easy to work with and helps cap off a roof you can be proud of!

Fold-A-Vent Ridge Ventilation System is easy to install and power-nailable
Fold-A-Vent

Simply unfold Fold-A-Vent, secure and shingle-over Hot Moist Air Out, Fresh Air In! That's What You Get With Fold-A-Vent Ridge Ventilation System

Cap off your roof with Fold-A-Vent. Easy to install - just unfold, nail down and shingle over! When used with proper soffit/eave/intake vents, Fold-A-Vent will provide good constant ventilation!

20' length (7" wide)

$75 per length

Call us at (866) 950-5277for more information, or to place an order!